Hunter emitters apply water slowly and directly at the plant to ensure every drop is put to efficient use. They are available in three convenient styles including self-piercing barb, 10⁄32 threaded, and ½" female thread. The barb and 10⁄32 thread models are available in 2, 4, 8, 15, 23 l/hr models and the ½" female threaded models are available in 4 and 8 l/hr. This wide range of flow rates offers you the flexibility to give individual plants and trees the right amount of water from a single emitter. They are also color-coded for fast flow identification and feature coined edges for easy gripping during installation.
An optional diffuser cap is available to help gently distribute water at high l/hr flow and to protect the emitter outlet from clogging. Manufactured by Hunter in the USA, these emitters offer the ability to enhance both water and operational efficiency in any micro-irrigation zone.
Features
• Slowly delivers water right to the plant
• Available in three convenient styles
• Pressure compensating from 1 to 3.5 bar; 100 to 350 kPa
• Flow labeled in imperial and metric units
• Assembled in the USA
• Optional diffuser cap available
• Barb emitters can be inserted into ½" and ¼" tubing without tools for fast installation
• Colour-Coded Inlet: Models are colour-coded by flow rate for fast identification
• Coined Edge for easy installation: Ribbed edges provide easy tool-free installation
• Array of Flow Rates: With flow rates ranging from 1 to 23 l/hr, plants can get the right amount of water from a single emitter Operating Specifications
• Pressure compensating 1 to 3.5 bar; 100 to 350 kPa
Model | Inlet Type | Flow (l/hr) | ||
![]() |
BLUE | HE-050-B | Self-piercing Barb | 2.0 |
![]() |
BLACK | HE-10-B | Self-piercing Barb | 4.0 |
![]() |
RED | HE-20-B | Self-piercing Barb | 8.0 |
![]() |
TAN | HE-40-B | Self-piercing Barb | 15.0 |
![]() |
ORANGE | HE-60-B | Self-piercing Barb | 23.0 |
![]() |
BLUE | HE-050-T | 10/32 Thread | 2.0 |
![]() |
BLACK | HE-10-T | 10/32 Thread | 4.0 |
![]() |
RED | HE-20-T | 10/32 Thread | 8.0 |
![]() |
TAN | HE-40-T | 10/32 Thread | 15.0 |
![]() |
ORANGE | HE-60-T | 10/32 Thread | 23.0 |
![]() |
BLACK | HEB-10 | 1/2" Female Thread | 4.0 |
![]() |
RED | HEB-20 | 1/2" Female Thread | 8.0 |
![]() |
DIFFUSER CAP Gently distributes water at higher flows and protects the emitter outlet from clogging |
Power Your XC Hybrid or Node Controller by Harnessing Solar Energy.
Hunter’s Solar Panel provides maintenance-free operation that harnesses the sun’s energy to power controllers 24 hours a day, 7 days a week for years on end. It is compatible with the XC Hybrid and Node controllers, which offer both on-the-wall and in-valve-box installation. Connecting the Solar Panel to either controller is an easy process that can be done quickly by any installer. Once connected, the Solar Panel supplies 100% of the controllers’ power, and eliminates the need for battery replacements. Since there are no batteries involved, there’s no need to worry about running out of power or scheduling replacement runs. So not only is the Solar Panel the most convenient solution for powering battery-operated controllers, it’s the most environmentally friendly as well.
HI-SPNODE | Solar Panel Kit for Node controller, including Solar Panel, 12m of wire and charging unit |
HI-SPXCH | Solar Panel Kit for XC Hybrid controller, including Solar Panel, 12m of wire and charging unit |
SOLAR PANEL:
Height: 8.3cm
Width: 7.6cm
Depth: 1.6cm
NODE CHARGING UNIT:
Diameter: 8.9cm
Height: 4.5cm
XC HYBRID CHARGING UNIT:
Height: 5.7cm
Width: 4.5cm
Depth: 3.2cm
The R55A End of Pivot Sprinkler is changing the way farmers irrigate with center pivots. It can be used to pick up added hectare both throughout the full revolution of the pivot or just in the corners, depending on site specifics and irrigator preferences. It can be used in conjunction with a higher volume Big Gun Sprinkler – or on its own. The R55A is to be mounted in an upright position at the end of the overhang.
Pressure (bar) |
#60 Red Nozzle | #70 Yellow Nozzle | #80 Green Nozzle | #90 Blue Nozzle | ||||
Flow (m3/hr) | Radius (m) | Flow (m3/hr) | Radius (m) | Flow (m3/hr) | Radius (m) | Flow (m3/hr) | Radius (m) | |
1.0 | 6.3 | 12.2 | 8.3 | 12.2 | 10.3 | 12.5 | 11.8 | 13.1 |
1.4 | 7.2 | 13.1 | 9.5 | 13.1 | 11.7 | 13.4 | 13.6 | 14.0 |
1.7 | 8.1 | 13.7 | 10.6 | 13.7 | 13.1 | 14.0 | 15.1 | 14.6 |
2.1 | 8.8 | 14.0 | 11.6 | 14.0 | 14.3 | 14.3 | 16.6 | 14.9 |
Based on the proven durability of the PGP Ultra, we are happy to announce that the warranty period is now being extended to 5 years.
The MP3500 provides the longest-range coverage of all MP Rotator models at 10.7 metres and allows for MP specification in mid-range applications. Even at this distance, it still maintains all the other great features of existing MP models such as matched precipitation,wind resistant streams, robust design, and the highest level of uniformity on the market. It is the recommended multi-stream option for matched precipitation coverage up to 10.7 metres.
The MP Rotator features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil, and achieves an even distribution throughout the area being irrigated. This increased efficiency results in 30% less water use when compared to traditional sprays, and significantly reduces wasteful runoff. The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius.tight spaces. The MP800SR delivers water at a low application rate of 20 mm/hr, less than half that of traditional spray nozzles.
MP Rotator Information (351Kb)
MP Rotator® Brochure (1.02 Mb)
MP Rotator® Design Guide (1.37 Mb)
MP Rotator® Performance Chart (298.57 Kb)
MP 3500 Specifications (2.49 Mb)